Description
Feature | Description |
Routing | • Static routing
• RIP v1 and v2
• Inter-VLAN routing |
Layer 2 | • 802.1q -based VLANs
• 4 active VLANs (1 to 4094 range) |
Network | • Dynamic Host Configuration Protocol (DHCP) server, DHCP relay agent
• Point-to-Point Protocol over Ethernet (PPPoE), Point-to-Point Tunneling Protocol (PPTP), Layer 2 Tunneling Protocol (L2TP)
• DNS Proxy
• IGMP Proxy and multicast forwarding
• Dynamic Domain Name System (DynDNS, TZO)
• Network Address Translation (NAT), Port Address Translation (PAT), Network Address Port Translation (NAPT), Session Initiation Protocol Application Layer Gateway (SIP ALG), NAT traversal, one-to-one NAT
• Multiple DHCP pools
• Port Management |
IPv6 | • Dual-stack IPv4 and IPv6
• Multicast Listener Discovery (MLD) for IPv6 (RFC2710)
• Stateless address auto-configuration
• DHCP v6
• Internet Control Message Protocol (ICMP) v6 |
Security | Access control:
• IP access control lists (ACLs)
• MAC-based wireless access control
Firewall:
• SPI firewall
• Port forwarding and triggering
• DoS prevention
• Software based DMZ
Content filtering:
• Static URL blocking or keyword blocking
Secure management:
• HTTPS
• Username/password
802.1X
• Port-based RADIUS authentication (Extensible Authentication Protocol [EAP], Protected EAP [PEAP])
Certificate management
• X.509 v3 certificates
• Certificate upload using PEM format |
VPN | • 10 QuickVPN tunnels for remote client access
• 10 IPsec site-to-site tunnels for branch office connectivity
• Triple Data Encryption Standard (3DES), Advanced Encryption Standard (AES) encryption
• Message Digest Algorithm 5 (MD5)/Secure Hash Algorithm (SHA1) authentication
• Dead Peer Detection (DPD)
• IPsec NAT traversal
• VPN pass-through of PPTP, L2TP, IPsec |
Quality of Service | • 802.1p port-based priority on LAN port, application-based priority on WAN port
• 4 queues
• DiffServ support
• Traffic Metering |
Management | • Simple Network Management Protocol (SNMP) versions 1, 2c and v3
• Event logging: local, syslog, email alerts
• Firmware upgradable through web browser; imported/exported configuration in text format
• Simple browser-based configuration (HTTP/HTTPS)
• UPnP, Bonjour
• Network diagnostics with packet captures |
Performance | • NAT throughput: 95 Mbps
• 1000 concurrent sessions
• VPN throughput: 25 Mbps |
Wireless LAN Specifications
Table 2 gives the wireless specifications for the Cisco RV120W.
Table 2. Wireless LAN Specifications
Feature | Description |
WLAN hardware | IEEE 802.11n standard-based access point with 802.11b/g compatibility
Radio and modulation type:
• 802.11b: direct sequence spread spectrum (DSSS)
• 802.11g/n: orthogonal frequency division multiplexing (OFDM)
• 2 omnidirectional 1.8 dBi gain external antennas
Operating channels:
• 11 in North America
• 13 in most of Europe
• Automatic channel selection
Transmit power:
• 802.11b: 17 dBm /- 1.5 dBm
• 802.11g: 15 dBm /-1.5 dBm
• 802.11n: 12.5 dBm /- 1.5 dBm
Receiver sensitivity:
• 802.11g: 54 Mbps @ -74 dBm
• 802.11n: 270 Mbps @ -71 dBm
Wireless Domain Services (WDS):
• Allows wireless signals to be repeated by up to 2 compatible receivers
Wi-Fi Multimedia (WMM):
• WMM with QoS (802.11e)
• WMM Power Save (WMM-PS) |
Service Set Identifiers (SSIDs) | • Up to 4 separate virtual networks |
Wireless VLAN | • Support for SSID to VLAN mapping with wireless client isolation |
WLAN security | • Wi-Fi Protected Access (WPA2, 802.11i) |
System Specifications
Table 3 gives the system specifications for the Cisco RV120W.
Table 3. System Specifications
Feature | Description |
WAN | 10/100 Mbps Fast Ethernet WAN port |
LAN | 4-port 10/100 Mbps switch with support for VLAN and QoS |
WLAN | Built-in high-speed 802.11n wireless access point |
Physical dimensions and weight | • W x D x H = 5.91 in. x 5.91 in. x 1.34 in. (150 mm x 150 mm x 34 mm)
• Weight: 1.10 lb (0.5 kg) |
Power | 12V 1A |
Certification | • FCC Class B
• CE
• IC
• Wi-Fi |
Environmental operating range | • Operating temperature: 0 ° to 40 °C (32 ° to 104 °F)
• Storage temperature: -20 ° to 70 °C (-4 ° to 158 °F)
• Operating humidity: 10% to 85% noncondensing
• Storage humidity: 5% to 90% noncondensing |
Reviews
There are no reviews yet.