Cisco C9200L-48PL-4X-A – Excess – Network Advantage – switch – L3 – 48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink) – rack-mountable – PoE+ (370 W)

The Cisco Catalyst 9200L-48PL-4X-A is a high-performance, Layer 3 switch designed for enterprise campus and branch office networks. It features 48 PoE+ Gigabit Ethernet ports and four 10 Gigabit Ethernet uplinks, offering robust connectivity and power delivery for network devices. With advanced security features and support for virtualization, this switch is ideal for businesses seeking a reliable and scalable networking solution.

Cisco Catalyst C9200L-48PL-4X-A Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200 Series switches offer simplicity without compromise – it is secure, always on, and IT simplified. As foundational building blocks for the Cisco Digital Network Architecture, Catalyst 9200 Series switches help customers simplify complexity, optimize IT, and reduce operational costs by leveraging intelligence, automation and human expertise that no other vendor can deliver regardless of where you are in the intent-based networking journey.

• Primary Information Cisco Excess 

  Product Description:	Cisco Catalyst 9200L – Network Advantage – switch – 48 ports – rack-mountable
  Device Type:	Switch – 48 ports – L3 – stackable
  Enclosure Type:	Rack-mountable
  Subtype:	Gigabit Ethernet
  Ports:	48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
  Power Over Ethernet (PoE):	PoE+
  PoE Budget:	370 W
  Performance:	Stacking bandwidth: 80 Gbps ¦ Switching capacity: 176 Gbps ¦ Forwarding rate: 130.95 Mpps ¦ Switching capacity with stacking: 256 Gbps ¦ Forwarding rate with stacking: 190 Mpps
  Capacity:	Virtual networks: 1 ¦ IPv4 routes: 11000 ¦ IPv4 routing table entries: 3000 ¦ IPv6 routing table entries: 1500 ¦ Multicast scale: 1000 ¦ ACL scale entries: 1500 ¦ FNF entries: 16000 ¦ VLANs supported: 1024 ¦ Switched virtual interfaces (SVIs): 512 ¦ QoS hardware queues per port: 8
  MAC Address Table Size:	16000 entries
  Jumbo Frame Support:	9198 bytes
  Routing Protocol:	OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
  Remote Management Protocol:	SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
  Features:	QoS, Cisco StackWise Technology, Rapid PVST+, SRR, PXE support, RSPAN, NetFlow, Energy Efficient Ethernet, MIB, CoS, FNF, 802.1x authentication, DSCP support, MACsec support, 6MB packet buffer, CoPP, SPAN, EEM, PIM, FHS, PVLAN support, CIR
  Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
  Power:	AC 100-240 V (50 – 60 Hz)
  Power Redundancy:	Optional
  Dimensions (WxDxH):	17.5 in x 11.3 in x 1.7 in
  Weight:	10.58 lbs

• General

  Device Type:	Switch – 48 ports – L3 – stackable
  Enclosure Type:	Rack-mountable
  Subtype:	Gigabit Ethernet
  Ports:	48 x 10/100/1000 (PoE+) + 4 x 10 Gigabit SFP+ (uplink)
  Power Over Ethernet (PoE):	PoE+
  PoE Budget:	370 W
  Performance:	Stacking bandwidth: 80 Gbps ¦ Switching capacity: 176 Gbps ¦ Forwarding rate: 130.95 Mpps ¦ Switching capacity with stacking: 256 Gbps ¦ Forwarding rate with stacking: 190 Mpps
  Capacity:	Virtual networks: 1 ¦ IPv4 routes: 11000 ¦ IPv4 routing table entries: 3000 ¦ IPv6 routing table entries: 1500 ¦ Multicast scale: 1000 ¦ ACL scale entries: 1500 ¦ FNF entries: 16000 ¦ VLANs supported: 1024 ¦ Switched virtual interfaces (SVIs): 512 ¦ QoS hardware queues per port: 8
  MAC Address Table Size:	16000 entries
  Jumbo Frame Support:	9198 bytes
  Routing Protocol:	OSPF, RIP-1, RIP-2, EIGRP, VRRP, PIM-SM, EIGRP for IPv6, PIM-SSM, policy-based routing (PBR), RIPng, MSTP
  Remote Management Protocol:	SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF
  Encryption Algorithm:	128-bit AES
  Features:	QoS, Cisco StackWise Technology, Rapid PVST+, SRR, PXE support, RSPAN, NetFlow, Energy Efficient Ethernet, MIB, CoS, FNF, 802.1x authentication, DSCP support, MACsec support, 6MB packet buffer, CoPP, SPAN, EEM, PIM, FHS, PVLAN support, CIR
  Compliant Standards:	IEEE 802.3, IEEE 802.3u, IEEE 802.3z, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s
  RAM:	2 GB
  Flash Memory:	4 GB
  Built-in Devices:	RFID tag

• Expansion / Connectivity

  Interfaces:

  48 x 1000Base-T RJ-45 PoE+ ¦ 4 x 10GBase-X SFP+ uplink ¦ 1 x network stack device ¦ 1 x management (LAN) RJ-45 ¦ 1 x console RJ-45

• Power

  Power Device:	Internal power supply – hot-plug
  Max Supported Qty:	2
  Power Redundancy:	Optional
  Voltage Required:	AC 100-240 V (50 – 60 Hz)

• Miscellaneous

  MTBF:

  346,270 hours

  Compliant Standards:

  CISPR 22 Class A, CISPR 24, EN 61000-3-2, EN 61000-3-3, EN55024, EN 61000-6-1, AS/NZS 60950-1, CCC, ICES-003 Class A, UL 60950-1, IEC 60950-1, EN 60950-1, RoHS, AS/NZS 3548 Class A, BSMI Class A, VCCI Class A, CNS 13438, EN 55022 Class A, FCC CFR47 Part 15 B Class A, EN 300 386, KN32, KN35, EN 55032 Class A, CISPR 32 Class A, CAN/CSA-C22.2 No. 60950-1, TCVN 7189 Class A, V-3 Class A, TCVN 7317, CISPR 35

• Dimensions & Weight

  Width:	17.5 in
  Depth:	11.3 in
  Height:	1.7 in
  Weight:	10.58 lbs