The Cisco Catalyst C9300-48U-A is a high-performance, managed switch designed for enterprise networks.
The C9300-48U-A offers 48 Gigabit Ethernet ports with Universal Power over Ethernet (UPoE) capabilities, allowing you to power and connect a variety of devices like IP phones, wireless access points, and security cameras. This switch is equipped with advanced features like stacking, high availability, and robust security, making it ideal for businesses seeking a reliable and scalable networking solution.
- Primary Information
Product Description: Cisco Catalyst 9300 – Network Advantage – switch – 48 ports – managed – rack-mountable Device Type: Switch – 48 ports – L3 – managed – stackable Enclosure Type: Rack-mountable 1U Subtype: Gigabit Ethernet Ports: 48 x 10/100/1000 (UPOE) Power Over Ethernet (PoE): UPOE PoE Budget: 822 W Performance: Switching capacity: 128 Gbps ¦ Stacking bandwidth: 480 Gbps ¦ Forwarding rate: 190.48 Mpps Capacity: IPv4 routing table entries: 32000 ¦ IPv6 routing table entries: 16000 ¦ Flexible NetFlow entries: 64000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 2000 MAC Address Table Size: 32000 entries Jumbo Frame Support: 9198 bytes Routing Protocol: OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF Features: DHCP support, trunking, Syslog support, full duplex mode, SSO, CBWFQ, WRED, STP support, ACL support, QoS, NSR, RSPAN, MIB, Cisco StackWise-480 technology, Cisco StackPower technology, FNF, MSDP, 802.1x authentication, 16MB packet buffer, FTP client, MACsec support, 3 fans, CoPP, VXLAN, AVC, SSM, integrated Wireshark, VLAN Double Tagging (Q-in-Q), EoMPLS, H-VPLS, Private VLAN, L3VPN support, ERSPAN, SGT caching, SGACL, ITSM integration, third-party IPAM integration Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at Power: AC 120/230 V (50 – 60 Hz) Power Redundancy: Optional Dimensions (WxDxH): 17.5 in x 17.5 in x 1.7 in Weight: 17.02 lbs System Requirements: Cisco IOS Universal - General
Device Type: Switch – 48 ports – L3 – managed – stackable Enclosure Type: Rack-mountable 1U Subtype: Gigabit Ethernet Ports: 48 x 10/100/1000 (UPOE) Power Over Ethernet (PoE): UPOE PoE Budget: 822 W Performance: Switching capacity: 128 Gbps ¦ Stacking bandwidth: 480 Gbps ¦ Forwarding rate: 190.48 Mpps Capacity: IPv4 routing table entries: 32000 ¦ IPv6 routing table entries: 16000 ¦ Flexible NetFlow entries: 64000 ¦ VLAN IDs: 4000 ¦ Switched virtual interfaces (SVIs): 2000 MAC Address Table Size: 32000 entries Jumbo Frame Support: 9198 bytes Routing Protocol: OSPF, IS-IS, RIP-1, RIP-2, BGP, EIGRP, HSRP, IGMP, VRRP, PIM-SM, OSPFv3, PIM-SSM, MSDP, policy-based routing (PBR), RIPng Remote Management Protocol: SNMP 1, RMON 1, RMON 2, SNMP 3, SNMP 2c, CLI, NETCONF, RESTCONF Encryption Algorithm: 128-bit AES Features: DHCP support, trunking, Syslog support, full duplex mode, SSO, CBWFQ, WRED, STP support, ACL support, QoS, NSR, RSPAN, MIB, Cisco StackWise-480 technology, Cisco StackPower technology, FNF, MSDP, 802.1x authentication, 16MB packet buffer, FTP client, MACsec support, 3 fans, CoPP, VXLAN, AVC, SSM, integrated Wireshark, VLAN Double Tagging (Q-in-Q), EoMPLS, H-VPLS, Private VLAN, L3VPN support, ERSPAN, SGT caching, SGACL, ITSM integration, third-party IPAM integration Compliant Standards: IEEE 802.3, IEEE 802.3u, IEEE 802.1D, IEEE 802.1Q, IEEE 802.3ab, IEEE 802.1p, IEEE 802.3af, IEEE 802.3x, IEEE 802.3ad (LACP), IEEE 802.1w, IEEE 802.1x, IEEE 802.1s, IEEE 802.3at RAM: 8 GB Flash Memory: 16 GB Status Indicators: Status - Expansion / Connectivity
Interfaces: 48 x 1000Base-T RJ-45 UPOE ¦ 1 x USB 2.0 Expansion Slots: 1 (total) / 1 (free) x expansion slot - Power
Power Device: Internal power supply – hot-plug Installed Qty: 1 Max Supported Qty: 2 Power Redundancy: Optional Power Provided: 1100 Watt Voltage Required: AC 120/230 V (50 – 60 Hz)