About the IE-4010-16S12P
SFP and PoE+ copper split the downlinks evenly on the IE-4010-16S12P: twelve FE/GE SFP ports and twelve FE/GE PoE+ copper ports, with four FE/GE SFP uplinks. Switching capacity is 56 Gbps, with 28 Gbps of forwarding bandwidth at line rate and 41.67 Mpps with 64-byte packets.
The power supplies you fit set the PoE budget: 80 W with one 150 W supply, 200 W with two 150 W, 180 W with one 250 W, 285 W with 250 W plus 150 W and 360 W with two 250 W. The modular supplies are the PWR-RGD-AC-DC-H and PWR-RGD-LOW-DC-H at 150 W and the PWR-RGD-AC-DC-250 at 250 W. Power consumption is a maximum of 70 W not including PoE.
Management is through the Cisco IOS CLI, a web-based GUI or Express Setup. It runs from -40 to +70°C in a vented enclosure with 40 LFM of airflow and meets IEEE 1613 and IEC 61850-3 for substations and EN 50121-4 for railway use.
What’s included
- IE-4010-16S12P switch
Sold separately
- One or two power supplies: PWR-RGD-AC-DC-H, PWR-RGD-LOW-DC-H or PWR-RGD-AC-DC-250
- SFP transceivers for the SFP downlinks and uplinks
Not sure which model fits? Call (984) 225-1600 or request a quote and we’ll answer the same business day.
IE-4010-16S12P specifications
| Downlink ports | 12× FE/GE SFP + 12× FE/GE PoE+ copper |
|---|---|
| Uplink ports | 4× FE/GE SFP |
| PoE budget | 80 W (150 W supply); 200 W (two 150 W); 180 W (250 W); 285 W (250 W + 150 W); 360 W (two 250 W) |
| Switching capacity | 56 Gbps (28 Gbps forwarding bandwidth, line rate) |
| Forwarding rate | 41.67 Mpps (64-byte packets) |
| Power supply | Modular DIN-rail supplies: PWR-RGD-AC-DC-H / PWR-RGD-LOW-DC-H (150 W) or PWR-RGD-AC-DC-250 (250 W); dual supplies supported |
| Form factor | Rack-mount; 1.75 × 17.5 × 14.0 in (4.45 × 44.5 × 35.6 cm) with 150 W supplies; 12.7 lb (5.78 kg) without power supply |
| Management | Cisco IOS CLI; web-based GUI; Express Setup |
| Operating temperature | -40 to +70°C (vented enclosure, 40 LFM); -40 to +60°C (sealed enclosure); -34 to +75°C (fan or blower-equipped enclosure, 200 LFM) |
Full specifications (6)
Industrial certifications
| Hazardous locations | Class 1, Div 2, gas groups IIC (ANSI/ISA 12.12.01, CSA C22.2 No. 213); IECEx and ATEX Class I, Zone 2; cabinet enclosure required |
|---|---|
| Substation | IEEE 1613; IEC 61850-3 |
| Railway | EN 50121-4; EN 50121-3-2 |
| Traffic and rail signalling | NEMA TS-2 |
| Ingress protection | IP30 |
Power
| Power consumption | Maximum of 70 W not including PoE consumption |
|---|
Compare IE4010 models
Swipe the table sideways to see every column.
| Model | Ports | Price |
|---|---|---|
| IE-4010-16S12P this page | 12× FE/GE SFP + 12× FE/GE PoE+ copper | $3,450.00 |
| IE-4010-4S24P | 24× FE/GE PoE+ copper | $3,825.00 |
Compatible parts
| Power supplies | ||
|---|---|---|
| PWR-RGD-AC-DC-250 | 250 W | $1,150.00 · In stock |
| PWR-RGD-AC-DC-H | 150 W | $355.65 |
| PWR-RGD-LOW-DC-H | 150 W low-voltage DC | $725.00 |
| SD card | ||
| SD-IE-1GB= | 1 GB SD memory card, spare | Ask for a quote |
Common questions
What PoE budget do I get with two power supplies on the IE-4010-16S12P?
200 W with two 150 W supplies, 285 W with one 250 W and one 150 W, and 360 W with two 250 W.
Can the IE-4010-16S12P run on one power supply?
Yes. Dual supplies are supported, and the PoE budget is 80 W with one 150 W supply and 180 W with one 250 W.

