Meraki MR86-HW – wireless access point – Wi-Fi 6 – cloud-managed

The Cisco Meraki MR86-HW sets the standard as the fastest Wi-Fi 6 option available today, specifically tailored for challenging outdoor and high-density industrial indoor environments. Equipped with an advanced chipset, it achieves an impressive aggregated dual-band frame rate of up to 3.55Gbps through dual-concurrent, 4×4:4-stream radios and multigigabit uplink support. Its multigigabit uplink ensures future-proofing by integrating the latest multigigabit switching technology, while enhanced mesh rate selection algorithms enhance bridging and connectivity performance between access points.

This device features a dedicated third radio that delivers real-time WIDS/WIPS (Wireless Intrusion Detection System/Wireless Intrusion Prevention System) with automated RF optimization. Additionally, an integrated fourth radio offers Bluetooth Low Energy (BLE) scanning and Beaconing functionality. The MR86 is entirely cloud-managed through the user-friendly Meraki Dashboard, providing a seamless experience without additional costs or complexities.

Designed to withstand harsh conditions, the MR86-HW boasts a ruggedized enclosure, an IP67 rating for dust and water resistance, and an extended operating temperature range. These attributes make it the ideal choice for environments with high-performance and high-density networking requirements.

Antennas are not included by default.
List of compatible antennas: MA-ANT-20, MA-ANT-25, MA-ANT-27, and AIR-ANT2513P4M-N.

Primary Information

• General

  Device Type:	Wireless access point
  Ruggedized Design:	Outdoor
  Width:	11.8 in
  Depth:	6 in
  Height:	2.2 in
  Weight:	3.31 lbs

• Networking

  Form Factor:	External
  Connectivity Technology:	Wireless
  Line Coding Format:	1024 QAM, OFDMA
  Data Link Protocol:	IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.11n, IEEE 802.11ac Wave 2, 802.11ax
  Spread Spectrum Method:	OFDMA
  Network / Transport Protocol:	IPSec
  Cloud-Managed:	Yes
  Frequency Band:	2.4 GHz, 5 GHz
  Status Indicators:	Power, boot state, status
  Features:	Firewall protection, VPN support, firmware upgradable, Wireless Intrusion Detection System (WIDS), Wi-Fi Multimedia (WMM) support, Quality of Service (QoS), Maximum Ratio Combining (MRC), Wireless Intrusion Prevention System (WIPS), DiffServ Code Point (DSCP) support, MU-MIMO technology, Bluetooth Low Energy Beaconing, Unscheduled Automatic Power Save Delivery (U-APSD), SU-MIMO technology, opportunistic key caching (OKC), 4×4:4 MU-MIMO technology, packet aggregation, Target Wait Time (TWT)
  Encryption Algorithm:	AES, TLS, TTLS, TKIP, WPA, WPA2-PSK, WPA2-Enterprise, WEP, EAP-SIM, WPA3-Enterprise, WPA3-Personal, WPA3-Enhanced Open
  Authentication Method:	MS-CHAP v.2, Extensible Authentication Protocol (EAP), EAP-SIM
  Compliant Standards:	IEEE 802.1Q, IEEE 802.1p, IEEE 802.11b, IEEE 802.11a, IEEE 802.11g, IEEE 802.1x, IEEE 802.11i, IEEE 802.11h, IEEE 802.11e, IEEE 802.11n, IEEE 802.11k, IEEE 802.3at, IEEE 802.11r, IEEE 802.11u, IEEE 802.11ac Wave 2, IEEE 802.11ax

• Antenna

  Antenna:

  External

• Expansion / Connectivity

  Interfaces:

  1 x 1/2.5GBase-T (PoE+) – RJ-45

• Miscellaneous

  Included Accessories:	Mounting kit
  Compliant Standards:	CSA, VCCI, ICES-003, EN55024, CISPR 22, RSS-102, FCC Part 15 C, UL 2043, RoHS, FCC Part 2, AS/NZS 4268, FCC Part 15 E, IP67, EN 62311, NCC, EN 300 328, EN 50385, LP0002, RSS-247, EN 301 489-1-17, EN 62479, EN 301 893, EN 55032, AS/NZS 2772, CB 60950, CB 62368, IFT, NOM-208

• Power

  Power Over Ethernet (PoE) Supported:	PoE+
  Power Consumption Operational:	18 Watt

• Environmental Parameters

  Min Operating Temperature:	-40 °F
  Max Operating Temperature:	131 °F
  Humidity Range Operating:	5 – 95% (non-condensing)

• Special Feature

  COO:

  TAIWAN

• UNSPSC Code

  UNSPSC Code:

  43222631