Meraki MR36H-HW Wi-Fi 6 Indoor Access Point – 2×2, 1G Uplink

About the MR36H-HW

Three Gigabit outputs and a passthrough port are built into the MR36H-HW, an indoor wall-plate 802.11ax (Wi-Fi 6) access point with 2×2 MIMO, two spatial streams and internal antennas. Its aggregate frame rate is 1.5 Gbps, and it is managed from the Meraki Dashboard.

One of the three outputs supplies 802.3af PoE to a connected device. To run with PoE out, the MR36H-HW takes 802.3at PoE (30 W max) on its 10/100/1000 RJ45 uplink; on 802.3af it runs in a low-power mode that turns PoE out off. A MA-INJ-4 or MA-INJ-6 injector fits it.

It installs on a single-gang wall box and measures 6.1 × 4.33 × 0.9 in. For surface mounting there is the optional MA-MNT-MR-H2 surface mounting kit, sold separately, and the MA-MNT-MR-H1A wall mount kit also fits the MR36H-HW.

What’s included

• MR36H-HW wall-plate access point, managed from the Meraki Dashboard

Sold separately

• A PoE injector where the switch port does not supply 802.3at PoE
• A surface mounting kit, if the access point is not going on a wall box

Not sure which model fits? Call (984) 225-1600 or request a quote and we’ll answer the same business day.

MR36H-HW specifications

Wi-Fi standard	802.11ax (Wi-Fi 6)
Radios / spatial streams	2x2 MIMO, two spatial streams
Max data rate	1.5 Gbps aggregate frame rate
Uplink port	1× 10/100/1000 RJ45 uplink; 3× Gigabit outputs (one with 802.3af PoE out); passthrough port
Power (PoE class)	802.3at PoE (30 W max); 802.3af low-power mode disables PoE out
Antennas (internal/external)	Internal
Indoor/outdoor	Indoor (wall plate)
Management	Meraki Dashboard
Antenna gain	5.4 dBi at 2.4 GHz; 6 dBi at 5 GHz
Operating temperature	32 to 104°F (0 to 40°C)
Dimensions	6.1 × 4.33 × 0.9 in (15.5 × 11 × 2.3 cm)

Compatible parts

PoE injectors
MA-INJ-4	802.3at PoE injector	$38.15
MA-INJ-6	Maximum output power: 60W	$219.99
Mounting kits
MA-MNT-MR-H1A	Wall mount kit for MR30H/36H	$26.06
MA-MNT-MR-H2	Optional surface mounting kit	Ask for a quote

Common questions

Does the MR36H-HW have PoE out?

Yes, on one of its three Gigabit outputs, at 802.3af. PoE out needs 802.3at PoE into the access point; in 802.3af low-power mode it is off.

How many wired ports does the MR36H-HW have?

A 10/100/1000 RJ45 uplink, three Gigabit outputs and a passthrough port.